What Is The Best Way To Fix Leaks In A Swimming Pool?

Simple Logic Will Help You Fix Leaks Quickly!

These are the best ways to find and then fix your swimming pool leaks.

This can affect all swimming pool owners, whether you own an above ground or an in-ground pool. If you have a leaking swimming pool it is usually quite obvious that there is a leak somewhere. For the above ground pools a leak will be quite easy to spot and of course this is because if the leak is a large one you will easily see the water coming out of the leak.

However, smaller leaks or hidden leaks from an in ground swimming pool may not actually be that easy to discover. Often times you may be lucky and notice quickly that the water level in your pool is somewhat lower than it really should be and this may concern you.

Irrespective of whether you notice a leak and can see some water seeping away from the pool or you notice that the level of the water is looking lower than it normally does then it may prove to be quite a difficult task to actually find the source of the leak as it might be well hidden.

You Need To Verify That You Actually Do Have A Leak

Approach this task sensibly and first try and verify that you actually do have a leak in the pool. Although the water level may be lower than normal it is not a given that swimming pool has a leak in it.

You need to be aware that there are in fact technically 3 different ways that water can be lost from your pool. The first is evaporation, the second way will be due to leaks in the swimming pool’s actual shell and thirdly there may be leaks in the plumbing to and from your pool. Sometimes water levels can just drop due to normal use of the pool. With lots of kids jumping in and maybe adults too as well as a lot of splashing you will find that it will cause a loss of water from the swimming pool.

So take the right approach and whenever you think you have a leak then check your swimming pool carefully. You really need to investigate the pool fully before thinking about attempting to fix the leak.

How To Check For Leaks and Pool Water Evaporation

If you know that there has not been much splashing or even diving into your pool which might have caused the water loss from the pool then your next step should be to check for water loss from evaporation. Doing this check is a fairly simple task to complete.

First you should get a clear bucket or large container so you can fill it up with some water from your swimming pool. Then you should place it on the first step down into your pool or put it in the shallowest location in your pool.

Secondly, empty enough water out of the container and make sure that its’ water level is exactly even with that of the level of the water in the pool. Mark the level of the water inside the container and also mark the level of the water in the pool on  the outside of the container. You should then leave the container in place in the pool for a few days and ensure that no one uses the pool during this period.

Thirdly, you should check the container again a few days later and you will see that the water level in both the swimming pool and container should still be the same if you are not losing water from the pool. If both of the water levels have reduced by the same amount then your water loss is probably caused by evaporation. But if the current pool water level on the container is lower than level of the water the container water then it looks like you have a leak somewhere in your pool.

How To Find The Source Of Your Leak

As soon as you are convinced that you have a pool leak you must then start looking to find the source of your leak.

The obvious first place to look for leaks is close the pool’s pump and water filter. Then check all the plumbing, all the pipes and hoses, which you will find connecting the water pump to the swimming pool itself. When you check and find drips or wet and any damp patches in any of these ares then try to trace them back to the source of where the water is escaping. One very common pool leak location will be where any of the plumbing pipes are connected.

If your checks should prove that the plumbing pipes, water pump or water filter don’t actually show any signs of leaking at all, then you should to start checking the swimming pool’s shell in more detail and as soon as possible.

For owners of an above ground pool the pool shell is often a common leakage location and fortunately they are quiet easy to inspect. All you have to do is simply check over every inch of your pool’s shell and try your best to discover the actual source of the leak. It is possible that you will find that the ground around the pool can help you quickly locate the source of the leak because it may actually be somewhat wetter than other drier areas. As soon as you have clearly identified the source of the leak in your pool you can easily fix it by patching it with a easily obtainable pool repair kit.

The Best Way To Fix A Pool Leak!

However, if you own an in ground pool and if you think the leak might be in the actual shell itself then you will have to call in a professional to do your pool repair for you. This is because shell leaks in an in-ground swimming pool are very complicated and they are not usually something that you can fix yourself very easily or at all in some cases..

One final piece of advice is that whatever type of swimming pool you own if you have a water leak in your pool, but you can not find the source of that leak yourself, then your best bet will always be to call in a professional to fix it for you. They are specially trained and with their pool experience they will be able to locate your leak and repair it for you very quickly.